JAMB UTME - Geography - 2023

The type of energy that is most environmentally friendly is

Antwoorddetails

The most environmentally friendly type of energy is solar energy. Solar energy refers to the energy that is derived from the sun's rays. Here's why solar energy is considered to be the most environmentally friendly option:
1. Renewable: Solar energy is a renewable source of energy. The sun is constantly shining, making solar energy an abundant and inexhaustible resource. As long as the sun exists, we will continue to have solar energy available to us.
2. Zero Emissions: Solar energy produces zero emissions during its operation. Unlike other energy sources like fossil fuels (such as coal or natural gas) that release harmful pollutants and greenhouse gases when burned, solar energy is clean and does not contribute to air pollution or climate change.
3. No Noise Pollution: Solar energy systems operate silently, unlike some other energy sources like thermal or nuclear power plants that can generate noise pollution. This makes solar energy a favorable option, particularly for residential areas.
4. Low Maintenance: Solar panels require minimal maintenance once installed. Regular cleaning to keep them free from dust and debris is usually sufficient. This reduces the need for ongoing maintenance and associated environmental impacts.
5. Modularity and Scalability: Solar energy systems can be easily scaled up or down depending on the energy requirements. They can range from small individual rooftop installations to vast solar farms. This flexibility makes solar energy a versatile option for different settings and energy demands.
6. Local Generation: Solar energy can be generated locally, reducing the need for extensive transmission networks and energy loss during distribution. Local generation can enhance energy independence, reduce reliance on centralized power systems, and result in more resilient and sustainable energy supply.
In conclusion, solar energy is the most environmentally friendly option due to its renewable nature, zero emissions, lack of noise pollution, low maintenance requirements, modularity and scalability, as well as its ability to generate energy locally. It is a sustainable and clean source of energy that has the potential to reduce our carbon footprint and mitigate the impacts of climate change.

River regime is best described as the

Antwoorddetails

The river regime generally describes the character of the typical fluctuations of a flow of a river, but can also refer to the mathematical relationship between the river discharge and its width, depth and slope

Crater lakes are usually associated with areas

Antwoorddetails

A crater lake is usually considered as a dormant volcano. They tend to have a steep-sided conical form

Which of the following is not a process of chemical weathering?

Antwoorddetails

Chemical weathering is a process in which the chemical composition of rocks and minerals is altered due to exposure to certain substances or environmental conditions. It plays a significant role in the breakdown and decomposition of rocks over time. Out of the options given, **frost action** is not a process of chemical weathering. Frost action, also known as freeze-thaw weathering, refers to the physical breakdown of rocks caused by repeated freezing and thawing of water within the rock fractures. It is a type of physical weathering, not chemical. Now let's briefly explain the other three options and how they relate to chemical weathering: 1. **Hydrolysis** is a chemical process in which water reacts with minerals in the rock, leading to their breakdown. Minerals such as feldspar and mica are commonly affected by hydrolysis. Water molecules interact with these minerals, causing them to break down into new minerals or dissolved ions. This process weakens the rock's structure and contributes to its gradual degradation. 2. **Oxidation** is another chemical process that occurs when certain minerals in rocks react with oxygen in the presence of water or air. This reaction causes the minerals to undergo a chemical change, resulting in the formation of new compounds. For example, when iron minerals in rocks come into contact with oxygen, they can oxidize and form iron oxide, more commonly known as rust. This process weakens the rock and makes it more susceptible to further weathering. 3. **Carbonation** is the chemical weathering process associated with the dissolution of carbon dioxide in water, forming carbonic acid. This acid reacts with minerals such as calcium carbonate (present in rocks like limestone and marble), leading to their dissolution. Carbonation is a common process in regions with a high concentration of carbon dioxide in the atmosphere or in areas where water with dissolved carbon dioxide comes into contact with rocks. In conclusion, **frost action** is not a process of chemical weathering but rather a form of physical weathering. Hydrolysis, oxidation, and carbonation, on the other hand, are all examples of chemical weathering processes that contribute to the degradation and alteration of rocks over time.

The most common form of migration experienced in countries of Tropical Africa is

Antwoorddetails

The most common form of migration experienced in countries of Tropical Africa is **rural-urban migration**. This refers to the movement of people from rural areas, such as villages and small towns, to urban areas, such as cities and towns. There are various reasons why rural-urban migration is prevalent in Tropical Africa. One of the main factors is the search for better economic opportunities. Urban areas tend to offer more job opportunities, higher wages, and better living conditions compared to rural areas. Many people from rural communities migrate to cities in hopes of finding better employment and improving their standard of living. Another important factor contributing to rural-urban migration is the availability of social amenities and services in urban areas. Cities often have better access to education, healthcare, infrastructure, and recreational facilities. People may migrate to urban centers to access these services and provide better opportunities for their families. Moreover, urban areas serve as economic and cultural hubs, attracting people from rural areas seeking to benefit from the diversity and dynamism of city life. Cities offer a wide range of social and cultural activities, entertainment options, and opportunities for networking and socializing. However, it is important to note that rural-urban migration also presents some challenges. The rapid influx of people into cities can lead to overcrowding, strain on infrastructure, and increased competition for resources and jobs. Additionally, migration can have an impact on rural communities as they may experience a loss of human capital and skills. In summary, rural-urban migration is the most common form of migration in countries of Tropical Africa due to the search for better economic opportunities, access to social amenities, and the attraction of urban culture and lifestyle. While it brings benefits to individuals and urban areas, it also poses challenges that need to be addressed for sustainable development.

Nigeria major export commodity is

Antwoorddetails

Nigeria's biggest export is crude oil, a commodity that represents over three-quaters(78.7%) of its total exported goods by value.

Plateaux formed together with fold mountains are best described as

Antwoorddetails

Plateaux formed together with fold mountains are best described as "intermountain plateaus." Intermountain plateaus are large, elevated flat lands that are found between different mountain ranges. These plateaus are typically formed when tectonic forces cause the Earth's crust to buckle and fold, creating fold mountains. As these mountains rise, the surrounding areas are also uplifted, resulting in the formation of plateaus. Unlike regular plateaus, intermountain plateaus are not as deeply dissected by erosion. This means that they generally have a more even and flat topography compared to other types of plateaus. However, they still exhibit some degree of ruggedness due to the uplift and folding processes that occurred during their formation. Overall, intermountain plateaus are important features of the Earth's landscape. They provide a transitional zone between mountainous regions and the lower-lying areas beyond, and they often serve as essential water catchment areas, playing a crucial role in supplying water to rivers and streams. Their relatively flat terrain also makes them suitable for human activities such as agriculture and transportation.

What is the temperature around an aeroplane flying at an altitude of 4000metres if the temperature on the earth's surface is 40ºc $\mathrm{<br>}$?

Antwoorddetails

Lapse rate is simply described as 0.65°C per 100m of ascent or 6.5ºC per 1000m of ascent.
Therefore 4000m of ascent= 6.5ºC x 4000m/1000m=26.0ºC
Then, the temperature around the aeroplane is = 40ºC - 26ºC = 14°C

The table above shows the temperature and rainfall distribution of station Z. Study and use it to answer the question. Which month of the year has the highest temperature

Antwoorddetails

To determine which month of the year has the highest temperature in station Z, we should analyze the data given in the table.
Looking at the table, we can see that the **temperature values** are given in the column labeled "Temperature (°C)". We need to find the month with the highest temperature value.
By examining the temperature values for each month, we can observe the following:
- In **April**, the temperature is 27°C - In **May**, the temperature is 30°C - In **June**, the temperature is 32°C - In **August**, the temperature is 29°C
From this information, we can clearly see that the month with the **highest temperature** in station Z is **June**, with a temperature of **32°C**.
Therefore, the answer to the question is that **June** is the month of the year with the highest temperature in station Z, as evidenced by the table.

Which of the following is not correct about the great circle?

Antwoorddetails

A great circle is a type of circle that can be formed on the Earth's surface. It is called "great" because it has the same radius as the Earth. Let's go through each statement and determine which one is not correct: 1. The statement says that the Equator is a Great Circle among the latitudes. This statement is **correct**. The Equator is indeed a great circle because it is a circle that cuts the Earth in half, dividing it into the Northern Hemisphere and the Southern Hemisphere. 2. The statement says that the Greenwich Meridian and the International Date Line are the only lines of latitude forming a Great Circle. This statement is **not correct**. The Greenwich Meridian and the International Date Line are not lines of latitude; they are lines of longitude. A great circle can be formed by any line of latitude, not just the Greenwich Meridian and the International Date Line. 3. The statement says that the Great Circle divides the Earth into two equal spheres. This statement is **not correct**. The Great Circle does divide the Earth, but not into equal spheres. Instead, it divides the Earth into two hemispheres, which are halves of the Earth. 4. The statement says that the center of the Great Circle is also the center of the Earth. This statement is **not correct**. The center of a great circle does not necessarily coincide with the center of the Earth. The center of a great circle is simply the midpoint of the circle, which can be anywhere on the Earth's surface. To summarize: - Statement 1 is correct. - Statement 2 is not correct. - Statement 3 is not correct. - Statement 4 is not correct. Therefore, the statement that is not correct about the great circle is statement 2, which claims that the Greenwich Meridian and the International Date Line are the only lines of latitude forming a Great Circle.

The difference in time between two longitudes is approximately

Antwoorddetails

The difference in time between two longitudes is approximately 4 minutes.
To understand this, let's first understand what longitudes are. Longitudes are imaginary lines that run vertically around the Earth, from the North Pole to the South Pole. They help to identify specific locations on the Earth's surface.
Now, the Earth takes 24 hours to complete one full rotation around its axis. This rotation results in the sun appearing to rise and set in different parts of the world at different times. This is what gives us our concept of time zones.
By convention, the Earth is divided into 24 time zones, each covering approximately 15 degrees of longitude. Each time zone represents an hour of difference in time.
So, if we do the math, we can calculate that with 360 degrees (the full circumference of the Earth) divided by 24 time zones, each time zone covers 15 degrees of longitude. This means that for every 15 degrees of longitude you travel east or west, there is a time difference of about one hour.
Since each time zone represents one hour and there are 60 minutes in an hour, we can calculate that the time difference for every 1 degree of longitude is approximately 4 minutes (60 minutes divided by 15 degrees).
Therefore, the correct answer is 4 minutes

Barchan dunes move

Antwoorddetails

A barchan is a cresentic or moon-shaped structure. A barchan is formed when an obstacle like rocks impedes or prevents the movement of wind

The land-use activities which can be considered responsible for soil erosion in the tropics are

Antwoorddetails

Industrial activities such as production, construction etc, monoculture and lumbering are responsible for erosion in the tropics

When weathering occurs on hill slopes, rock debris usually pile up at the bottom of the hill slope to form

Antwoorddetails

When weathering occurs on hill slopes, the rock debris usually pile up at the bottom of the hill slope to form **scrree**. Scree is a deposition of loose rock fragments that have accumulated at the base of a steep slope or cliff. It is formed as a result of the continuous process of weathering, erosion, and gravity. Weathering is the breakdown of rocks by natural processes, such as wind, water, and temperature changes. This causes rocks to become smaller and more fragmented over time. Erosion is the process of transporting the fragmented rock material down the slope. Gravity plays a significant role in moving the loose rock fragments towards the bottom of the hill slope. As the weathered rock fragments accumulate at the base of the slope, they form a pile of loose debris called scree. Scree can range in size from small pebbles to larger rocks. It is usually found on steep slopes or cliffs where the force of gravity pulls the loose rock down and accumulates it at the bottom. In conclusion, when weathering occurs on hill slopes, the rock debris piles up at the bottom to form scree.

Which of the following has the highest salinity?

Antwoorddetails

The Dead Sea has the highest salinity among the given options. Salinity refers to the amount of salt dissolved in water. In other words, it is a measure of the saltiness of the water. The Dead Sea is located between Israel and Jordan, and it is actually not a sea but a saltwater lake. What makes the Dead Sea unique is its extremely high salt concentration. The water in the Dead Sea is about 10 times saltier than sea water. There are several reasons why the Dead Sea has such high salinity. Firstly, it is located in a region with a very hot and dry climate, which means that water evaporates quickly. As the water evaporates, the salt gets left behind, increasing the overall concentration of salt in the lake. Secondly, the Dead Sea is landlocked, which means it does not have an outlet or a flow of water that can dilute the salt concentration. Unlike the Mediterranean Sea or the Red Sea, which are connected to the global ocean system, the Dead Sea is a closed basin. As a result, the salt that enters the lake stays there and continues to accumulate over time. Lastly, the Dead Sea region is known for its rich mineral deposits, including salts. These minerals get washed into the lake through rivers and streams, further contributing to the high salinity of the water. In summary, the Dead Sea has the highest salinity among the given options due to its evaporation, lack of connection to the global ocean system, and the presence of mineral deposits. This high salinity creates a unique environment where floating becomes effortless and leads to the formation of salt crystals along the shores.

Which of the following represents the correct sequence in which denudation occurs?

Antwoorddetails

Denudation is the process of wearing away the Earth's surface by various agents such as water, wind, and ice. It involves the removal and transportation of rocks, sediments, and soil. The correct sequence in which denudation occurs is:
Weathering → Erosion → Deposition
1. Weathering: This is the first step in denudation. Weathering refers to the breakdown and decomposition of rocks and minerals at or near the Earth's surface. It can occur through physical, chemical, or biological processes. Physical weathering involves the mechanical breakdown of rocks into smaller fragments due to factors like temperature changes, frost action, or plant roots. Chemical weathering involves the alteration of rock composition through processes like dissolution, oxidation, or hydrolysis. Biological weathering refers to the breakdown of rocks by living organisms such as plants and animals.
2. Erosion: Once weathering has broken down the rocks, erosion takes place. Erosion is the process of removing and transporting the weathered materials from their original location to a new location. This is often done by agents such as water, wind, glaciers, or gravity. For example, water erosion occurs when rainfall or flowing water carries away sediments, creating channels, gullies, and valleys. Wind erosion happens when strong winds pick up and transport loose particles, leading to the formation of sand dunes and desert landscapes.
3. Deposition: After weathered materials have been eroded and transported, they are eventually deposited. Deposition occurs when the eroded particles and sediments settle down and come to rest in a new location. This can happen when the transporting agent loses energy, such as when a river slows down or when wind speed decreases. Deposited materials can form various landforms such as deltas, alluvial plains, or beaches.
In summary, denudation starts with weathering, where rocks are broken down. Then erosion takes place, transporting the weathered materials. Finally, the eroded materials are deposited in a new location.

The sun is vertically overhead at the tropic of Caprison in

Antwoorddetails

The sun is vertically overhead at the tropic of Capricorn on December 22nd. To understand why, we need to know a few things about the Earth's tilt and its movement around the sun. The Earth is tilted on its axis at an angle of about 23.5 degrees. This tilt is what gives us our seasons. During the year, the Earth moves around the sun in an elliptical path. On two specific days, called the solstices, the sun reaches its highest or lowest point in the sky. These are the days when the tilt of the Earth is most noticeable. On December 22nd, the Northern Hemisphere is tilted away from the sun. This means that the sun appears lower in the sky and its rays are more spread out. Meanwhile, the Southern Hemisphere is tilted towards the sun. This tilt causes the sun to appear higher in the sky and its rays to be more concentrated. The tropic of Capricorn is located at about 23.5 degrees south of the equator. On December 22nd, the sun is directly overhead at this latitude because the tilt of the Earth causes the sun's rays to be focused at that point. In summary, on December 22nd, the sun is directly overhead at the tropic of Capricorn because of the Earth's tilt and its position in its orbit around the sun.

Which of the following is not a problem militating against political and economic integration in West Africa?

Antwoorddetails

Political and economic integration can be hindered by powerful colonial ties, religion and political instability but currency should not be an obstacle because there should be an established exchange rate.

The sparse population in the middle belt of West Africa can be traced to all of the following except

Antwoorddetails

The sparse population in the middle belt of West Africa can be traced to all of the following except the concentration of industries.

1. Inter-ethnic war: Conflict between different ethnic groups can cause displacement and hinder population growth in the affected areas. It leads to a disruption in the social fabric and discourages people from settling in these regions.

2. Tsetse fly infestation: The presence of tsetse flies, which are carriers of the sleeping sickness disease, can greatly affect human habitation. These flies are notorious for their bites which can transmit the disease to humans and livestock. The presence of tsetse flies in the middle belt of West Africa makes it difficult for people to inhabit the area due to health risks.

3. Arab slave trade in the North: The Arab slave trade, which took place predominantly in North Africa, resulted in the forced migration and enslavement of many African populations. This historic slave trade did not have a direct impact on the sparse population in the middle belt of West Africa.

4. Concentration of industries: The concentration of industries usually leads to urbanization and increased population in certain areas. This option does not contribute to the sparse population in the middle belt of West Africa.

Therefore, the correct answer is that the sparse population in the middle belt of West Africa cannot be traced to the concentration of industries.

A tremendous pressure or temperature change may lead to the formation of

Antwoorddetails

Gnesis is a metamorphic rock. Metamorphic rocks are formed from pre-existing rocks which have been changed as a result of great heat and pressure

The highest concentration of industries in Nigeria is found in the

Antwoorddetails

The highest concentration of industries in Nigeria can be found in the Western zone. This region is also known as the Lagos-Ibadan Industrial Axis.
There are several reasons why the Western zone has the highest concentration of industries:
1. Proximity to Ports: The Western zone is close to major seaports, such as the Apapa Port in Lagos. This proximity allows for easier import and export of goods, reducing transportation costs for industries.
2. Infrastructure: The Western zone benefits from well-developed infrastructure, including good road networks, railways, and access to reliable power supply. These factors make it more conducive for industries to set up and operate efficiently.
3. Market Access: The Western zone has a large population, including the bustling city of Lagos, which provides a ready market for industries. The region serves as a major commercial hub, attracting businesses from various sectors.
4. Availability of Skilled Labor: The Western zone is home to several educational institutions, including universities and technical colleges. This abundance of institutions ensures a steady supply of skilled labor for industries in the region.
5. Government Support: The government has implemented policies and incentives to encourage industrial growth in the Western zone. These include tax incentives, subsidies, and initiatives such as the Lagos Free Trade Zone, which attracts both local and foreign investors.
In summary, the Western zone of Nigeria, specifically the Lagos-Ibadan industrial axis, has the highest concentration of industries due to its proximity to ports, well-developed infrastructure, access to market, availability of skilled labor, and government support. This region continues to attract businesses, driving economic growth and development in Nigeria.

Which of the following rocks is organically formed?

Antwoorddetails

Shale rocks are made of clay-sized particles and have a laminated appearance. They are a type of organica sedimentary rock.

The largest ocean in the world is the

Antwoorddetails

The largest ocean in the world is the Pacific Ocean. It covers the most extensive area compared to the other options listed. The Pacific Ocean stretches from the western coast of North and South America to the eastern coast of Asia and Australia. It is so vast that it is larger than the landmass of all the continents combined.
Its immense size is due to the tectonic plate boundaries that surround it. The Pacific Ocean is bordered by the Ring of Fire, a region that experiences frequent volcanic activity and earthquakes. This constant reshaping of the seafloor has allowed the Pacific Ocean to expand and dominate the Earth's surface.
With an area of approximately 63 million square miles, the Pacific Ocean is home to numerous islands, including Hawaii, Tahiti, and Fiji. It is also famous for its deep trenches, like the Mariana Trench, which is the deepest point in the world's oceans.
The Pacific Ocean plays a vital role in regulating the Earth's climate. It absorbs much of the sun's heat, helping to distribute warmth across the planet. This ocean is also crucial for global transportation and trade, serving as a major marine highway between the Americas, Asia, and Oceania.
In summary, the Pacific Ocean is the largest ocean in the world, encompassing a vast area and serving as a vital component of Earth's climate and global connectivity.

Which of the following is associated with savanna vegetation?

Antwoorddetails

avannas represents the vast majority of the areas which are characterised by a layerof perenial herbaceous plants, such as sedges with varrying degree of scrubs

Africa has the largest potential reserve of hydro-electric power in the world because

Antwoorddetails

It is of no doubt that Africa has the highest potential reserves of hydro-electric power because it is surrounded by large oceans.

The world's greatest gold producer is

Antwoorddetails

After a temporary set back in 2021 due to a sharp decline in output, Ghana has reclaimed its position as the top Gold producer

Which of the following is a wind deposited land form?

Antwoorddetails

A wind-deposited landform refers to a geological feature that is created or shaped by the action of wind carrying and depositing sediments. In this context, out of the four options given, the one that is a wind-deposited landform is **loess**. Loess is a specific type of sediment that is composed of fine particles of silt and clay that have been blown by wind over long distances and eventually deposited. It is typically pale yellow or light brown in color and has a very fine texture. Loess deposits often form in regions with strong and consistent winds, such as dry deserts or the margins of glacial systems. These sediments accumulate over time, often in thick layers, creating distinct landforms. One characteristic feature associated with loess is its ability to be easily eroded by wind and water. This erosion gives rise to unique landforms, such as **yardangs** and **deflation hollows**, which are also mentioned in the given options. A yardang is a ridge of rock that has been carved and streamlined by wind erosion. The wind scours away the loose sediment, leaving behind elongated ridges that run parallel to the prevailing wind direction. Yardangs can vary in size from a few meters to several kilometers long. A deflation hollow, on the other hand, is a depression in the landscape that forms when loose sediments are eroded away by wind, leaving behind a lowered area. These hollows can occur individually or in groups, and their size and shape depend on the intensity and duration of wind erosion. While both yardangs and deflation hollows are features associated with wind erosion, they are not technically wind-deposited landforms since they are created by the removal of sediment rather than the deposition of sediment. In summary, out of the options given, the wind-deposited landform is **loess**. It is a type of fine sediment made of silt and clay particles that are transported and deposited by the wind. Yardangs and deflation hollows, although associated with wind erosion, are not specifically wind-deposited landforms.

Soil erosion by action of rain can be caused y all the following except

Antwoorddetails

Aridity is a long term lack of rainfall or moisture. Soil erosion cannot take place in an srid area.

Which of the following distinguishes rotation from revolution?

Antwoorddetails

The statement that distinguishes rotation from revolution is that "The earth rotates on its axis while it revolves around the sun in an elliptical orbit." Rotation refers to the spinning of an object around its own axis. In the case of the Earth, it rotates on an imaginary line called its axis. This rotation is responsible for various phenomena like the change between day and night. As the Earth rotates, different parts of it are exposed to the Sun's light, creating the cycle of day and night. Revolution, on the other hand, refers to the movement of an object around another object in space. In the case of the Earth, it revolves around the Sun in an elliptical orbit. This revolution takes approximately 365.25 days to complete, which gives us a year. So, to summarize, rotation refers to the spinning of an object on its axis, causing phenomena like day and night. Revolution refers to the movement of an object around another object in space, giving us the concept of a year.

Countries in the northern hemisphere experience shorter days and longer nights when the sun is overhead on the

Antwoorddetails

On June 21, the sun is overhead at the tropic of cancer, resulting in June or summer scistics

A block mountain is formed as a result of

Antwoorddetails

A block mountain is formed as a result of faulting, specifically a type of fault called a normal fault.
When the Earth's crust experiences stress, it can cause rocks to break along fault lines. In the case of a normal fault, the rocks on one side of the fault move downward relative to the rocks on the other side. This downward movement creates a step-like feature on the Earth's surface, with one side lower than the other. This step-like feature is what we call a block mountain.
As time goes on, the forces of erosion, such as wind, water, and glaciers, start to wear away at the block mountain. However, the harder and more resistant rocks that make up the mountain are less easily eroded compared to the softer surrounding rocks. This causes the block mountain to stand out even more as a prominent and elevated feature in the landscape.
So, to summarize, a block mountain is formed when the Earth's crust experiences faulting, specifically a normal fault. The downward movement of rocks on one side of the fault creates a step-like feature on the Earth's surface, which we call a block mountain. Erosion then works to shape and define the mountain's features over time.

The table above shows the temperature and rainfall distribution of station Z. Study and use it to answer the question.The wettest month of the year is

Antwoorddetails

The wettest month of the year is determined by the month with the highest rainfall. From the table, the highest rainfall is 307mm, which occurs in August. Therefore, the wettest month of the year is August.

Which of the following is not true of the North Atlantic sea route?

Antwoorddetails

The North Atlantic sea route is the busiest sea route in the world. It links North America with Europe and Nigeria with Western Europe. Goods carried on this route do not include graius.

A settlement where two rivers meet is called a

Antwoorddetails

A settlement where two rivers meet is called a confluence town. This term is used to describe a place where two rivers merge or come together. It is also known as a river confluence or simply a confluence. In a confluence town, the two rivers join and flow as one. This merging of rivers creates a unique geographical feature and often leads to the formation of a settlement. The rivers may flow side by side before merging, or one river may flow into the other. The confluence point can be visible as a distinct meeting point or an area where the waters mix. Confluence towns have been historically significant because they often provided essential resources and transportation routes. The availability of water from two rivers made these settlements ideal for various activities such as fishing, trade, and agriculture. The confluence also facilitated transportation and trade routes as it served as a natural meeting point for people traveling along the rivers. These settlements tend to develop into vibrant communities, attracting people for their economic advantages and accessibility. Over time, confluence towns may grow and expand, becoming important centers of commerce, culture, and administration. In summary, a settlement where two rivers meet is called a confluence town. It is a place where two rivers merge or come together, offering valuable resources and opportunities for economic and social development.

Which of the following pairs of landforms can be found in the desert areas?

Antwoorddetails

Zeugens: These are tabular masses with a layer of soft rock lying beneath layer of hard rock
Rock pedestals: It consist of horizontal layer of hard and soft rocks

Rocks are said to be crystalline when the atoms forming them are

Antwoorddetails

Crystalline rocks are rocks that;
-do not contain fossils
-do not occur in layers i.e they are non-stratified

Which of the following stations is situated in a region of tropical monsoon climate?

Antwoorddetails

**Bombay (Mumbai)** is situated in a region of tropical monsoon climate. Tropical monsoon climate is characterized by high temperatures and heavy rainfall throughout the year, with distinctive wet and dry seasons. In this climate, the wet season is associated with the monsoon winds, which bring abundant rainfall. The dry season, on the other hand, is characterized by little to no rainfall. Mumbai experiences this type of climate due to its location on the western coast of India. The Arabian Sea to the west and the Western Ghats mountain range to the east influence the city's climate. The monsoon winds blow from the southwest during the wet season (June to September), bringing intense rainfall to the region. Mumbai receives a significant amount of rainfall during this period, accounting for a large portion of its annual precipitation. During the dry season (October to May), Mumbai experiences less rainfall, but the temperatures remain relatively high. The average temperature ranges from 25 to 35 degrees Celsius (77 to 95 degrees Fahrenheit) throughout the year. In summary, Mumbai (Bombay) is situated in a region of tropical monsoon climate due to its location on the western coast of India, which experiences high temperatures and heavy rainfall during the wet season, and relatively lower rainfall during the dry season.

What is the population density of a country with a total population of 140,000,000 and a total land area of 500,000 (\Km^2\)?

Antwoorddetails

To calculate the population density of a country, we need to divide the total population of the country by its total land area. In this case, we are given that the total population of the country is 140,000,000 and the total land area is 500,000 km². To find the population density, we divide the population by the land area: Population density = Total population / Total land area Population density = 140,000,000 / 500,000 = 280 persons per km². Therefore, the correct answer is **280 persons per km²**.

Great Britain and Germany are trading partners of west African countries from

Antwoorddetails

Great Britain and Germany are trading partners of West African countries from Western Europe. Western Europe refers to the region that is located in the western part of the European continent. It includes countries such as the United Kingdom (which includes Great Britain) and Germany. Trading partners are countries that engage in the exchange of goods and services with each other. In this case, West African countries have established trading relationships with Great Britain and Germany. This means that West African countries import goods and services from Great Britain and Germany, and they also export their own goods and services to these countries. The trading partnership between West African countries and Great Britain and Germany is mutually beneficial. West African countries can access a wider range of products from Great Britain and Germany, providing opportunities for economic growth and development. On the other hand, Great Britain and Germany can access valuable resources and markets in West Africa. Overall, the trading relationship between Great Britain, Germany, and West African countries helps to facilitate economic cooperation, promote regional development, and enhance international trade between these regions.

Kossou Dam is located on river

Antwoorddetails

Lake Kossou is Cote d'ivores largest lake. It lies on the Bandama river in the center of the country. It is an artificial lake, created in 1973 by damming the Badama river at kossou