Nkojọpọ....
Tẹ mọ́ & Dì mú láti fà yíká. |
|||
Tẹ ibi lati pa |
Ibeere 1 Ìròyìn
The feature is one or the land forms associated with_________
Awọn alaye Idahun
The feature associated with river erosion is valleys. River erosion occurs when a river's fast-moving water cuts into its riverbed and banks, causing the river to widen and deepen over time. This process creates steep-sided valleys that are wider at the bottom than at the top. The riverbed and banks are constantly being reshaped by the erosive forces of the water, which carry away sediment and rocks. Over time, the river's course may change as it continues to erode and deposit material, carving new valleys and leaving behind a signature of its past path in the form of terraces.
Ibeere 2 Ìròyìn
Study the map and answer the question. Intervisibility is possible between the points marked X and Y because the intervening slope is
Awọn alaye Idahun
Ibeere 3 Ìròyìn
Which of the following countries has the least potential for the production of steel?
Awọn alaye Idahun
Among the options given, Cuba has the least potential for the production of steel. Cuba is a small island country in the Caribbean with a limited supply of natural resources, including iron ore and coal, which are essential raw materials for steel production. Cuba's iron reserves are low-quality and require significant processing to be suitable for steelmaking. Additionally, Cuba has limited access to modern steelmaking technology and expertise, which further restricts its potential for steel production. On the other hand, India, Japan, and Germany have significant potential for steel production. India is one of the world's largest producers of steel, with abundant iron ore reserves and a highly skilled workforce. Japan and Germany are also major players in the global steel industry, with advanced technology and ample access to raw materials.
Ibeere 4 Ìròyìn
If the distance between two places on a map is 2cm, while the distance on land is 4km, the scale of the map is
Awọn alaye Idahun
The scale of a map is the ratio of the distance on the map to the actual distance on land. It is usually written as a fraction, like 1:100,000, where the first number represents the distance on the map and the second number represents the corresponding distance on land. To find the scale of the map in question, we need to divide the actual distance on land (4km) by the distance on the map (2cm). First, we need to convert 4 km to cm: 4 km = 4 x 10^3 m = 4 x 10^3 x 100 cm = 4 x 10^5 cm Now, we divide the actual distance on land (4 x 10^5 cm) by the distance on the map (2 cm): (4 x 10^5 cm) / (2 cm) = 2 x 10^5 So the scale of the map is 1 : 2 x 10^5, which is equivalent to 1:200,000.
Ibeere 5 Ìròyìn
The system of cultivation of tropical commercial crops estates is known as____________
Awọn alaye Idahun
The system of cultivation of tropical commercial crops estates is known as plantation agriculture. Plantation agriculture refers to a large-scale farming system where a single crop is grown on a large piece of land, usually in tropical countries. This type of agriculture is characterized by the use of large amounts of land, labor, and capital to cultivate crops such as rubber, sugar, coffee, cocoa, and tea. These crops are grown for commercial purposes, and the aim is to produce large quantities of a single product for export. The crops are typically grown in monoculture, which means that only one type of crop is grown in a particular area. This type of agriculture is often associated with the exploitation of workers, environmental degradation, and social and economic inequality.
Ibeere 6 Ìròyìn
The Farthest planet from the sun in the solar system is_______
Awọn alaye Idahun
The farthest planet from the Sun in the solar system is Pluto. Pluto used to be considered the ninth planet in the solar system, but it was reclassified as a "dwarf planet" in 2006. Pluto's distance from the Sun varies because it has an elliptical orbit, which means that its distance from the Sun changes throughout its orbit. On average, Pluto is about 3.7 billion miles (5.9 billion kilometers) away from the Sun. This makes it much farther from the Sun than any of the eight "traditional" planets in the solar system, including Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune. So, to summarize, Pluto is the farthest planet from the Sun in our solar system, even though it's now classified as a dwarf planet.
Ibeere 7 Ìròyìn
How were the major mountain belts of the world produced?
Awọn alaye Idahun
The major mountain belts of the world were produced by a geological process known as "folding". Over millions of years, immense pressure from tectonic plates caused rocks in the Earth's crust to buckle and fold, resulting in the formation of mountain ranges. This process is often associated with the collision of two tectonic plates, which can create enormous forces that push and compress rocks together, causing them to fold and uplift into mountains. Unlike weathering or wind erosion, which wear down and erode mountains over time, folding is a constructive process that builds mountains up. While rivers and other natural forces can contribute to the formation of mountains, they are generally not the primary cause of major mountain belts. Instead, the formation of mountain ranges is primarily driven by the slow but powerful movements of the Earth's tectonic plates over long periods of time.
Ibeere 8 Ìròyìn
Use the diagram below to answer the question. The feature is one of the landforms associated with
Awọn alaye Idahun
The feature in the diagram is a sand dune, which is a landform associated with wind deposition. Sand dunes are formed when wind carries sand particles and deposits them in a particular location, creating a mound of sand. Over time, as the wind continues to blow, the sand dune may shift or change in shape. Sand dunes can be found in deserts, on beaches, and in other areas with high wind activity.
Ibeere 9 Ìròyìn
One of the following is associated with wind deflation in arid region_________
Awọn alaye Idahun
Deflation is an action of wind when it picks up or remove loose particles from an area and leaves a denuded surface covered with coarse material too large for wind transport. The most noticeable results of deflation in some places are shallow depressions called blowouts
Ibeere 10 Ìròyìn
Use the information given in the chart and answer the question. If the total population of the city is 500,000 what is the population of ward 4?
Awọn alaye Idahun
Ibeere 11 Ìròyìn
All the following are environmental hazards except___________
Awọn alaye Idahun
The environmental hazard among the given options that is not included is afforestation. Afforestation refers to the process of planting trees in an area where there was no forest, or the forest has been destroyed, and it is typically seen as a positive action for the environment. On the other hand, the other three options are environmental hazards that can have negative impacts on people and the environment. Flooding, for example, can lead to property damage, displacement of people, and loss of life. Vulcanicity, which refers to the movement of magma and volcanic activity, can result in the release of toxic gases, destruction of property, and loss of life. Deforestation, which is the clearing of forests for various human activities, can cause soil erosion, loss of biodiversity, and contribute to climate change.
Ibeere 12 Ìròyìn
An instrument used for setting out right angle in surveying a parcel of land is
Awọn alaye Idahun
Surveying or land surveying is the technique, profession, and science of determining the terrestrial or three-dimensional positions of points and the distances and angles between them
Ibeere 13 Ìròyìn
Study the map and answer the question. Given that the area show on the map is in Northern Nigeria, which of the following crop combinations would best be cultivated in the area that is liable to flooding
Awọn alaye Idahun
Ibeere 14 Ìròyìn
What type of climate has the station___________
Awọn alaye Idahun
Climate is the weather conditions prevailing in an area in general or over a long period.
Ibeere 15 Ìròyìn
The oldest system of agriculture in Nigeria which now survives only in very remote areas is
Awọn alaye Idahun
The oldest system of agriculture in Nigeria which now survives only in very remote areas is shifting cultivation, also known as slash-and-burn agriculture. Shifting cultivation involves cutting down a patch of forest or woodland, burning the vegetation, and planting crops in the ash-enriched soil. Farmers would use the land for a few years until the soil fertility decreases, then abandon it and move to a new area, leaving the old area to regenerate into forest or woodland. This practice was sustainable when population densities were low and farmers had access to vast areas of land. However, with the growth of population and increased pressure on land, shifting cultivation has become less sustainable, leading to soil degradation, deforestation, and loss of biodiversity. Today, shifting cultivation survives only in very remote areas, where population densities are still low and access to land is not restricted.
Ibeere 16 Ìròyìn
One of the leading industrial nations of the world ranking second in manufacturing output after the USA is__________
Awọn alaye Idahun
Manufacturing industry in Japan is the most diversified with various advanced industries which are exceedingly successful. Japan's major export industries includes automobiles, consumer electronics, computers, semiconductors, and iron and steel. Additionally, key industries in Japan's economy are mining, nonferrous metals, petrochemicals, pharmaceuticals, bioindustry, shipbuilding, aerospace, textiles, and processed foods
Ibeere 17 Ìròyìn
A type of land-form that is associated with large scale orogeny is a
Awọn alaye Idahun
A fold mountain is a type of land-form that is associated with large scale orogeny. In simple terms, orogeny is the process of mountain building, which occurs when two tectonic plates collide and push up the land between them. This process causes the rock layers to bend, fold and become uplifted, creating a fold mountain. Examples of fold mountains include the Rocky Mountains in North America and the Himalayas in Asia.
Ibeere 18 Ìròyìn
Use the diagram below to answer the question. The feature marked X in the diagram is a
Awọn alaye Idahun
The feature marked X in the diagram is a cliff. A cliff is a high and steep rock face or earth surface that drops abruptly from a higher to a lower level. It can also be defined as a steep slope or vertical surface, especially one at the edge of a body of water like the ocean or a lake. The diagram shows a rocky surface that slopes down dramatically towards the water, which is a clear indication that it is a cliff.
Ibeere 19 Ìròyìn
The plains formed when the slopes of mountains are worn back in arid and semi-arid regions my mechanical weathering is called_______
Awọn alaye Idahun
The plains formed when the slopes of mountains are worn back in arid and semi-arid regions by mechanical weathering is called "Pediplains". Pediplains are a type of plain that form as a result of the gradual erosion and weathering of mountains and hills. They typically occur in arid and semi-arid regions where there is little vegetation to protect the land from erosion. Over time, as the wind, rain, and other natural forces wear away at the mountain slopes, sediment is carried downhill and deposited on the surrounding plain. This sediment can be made up of rocks, sand, and soil, and can create a relatively flat and gently sloping plain that extends out from the base of the mountain. Unlike other types of plains, such as alluvial plains or outwash plains, which are formed by water deposition, pediplains are formed by the mechanical weathering and erosion of rock and soil. They are typically found in regions where there is little precipitation and where the climate is dry and hot, which can help to speed up the weathering process.
Ibeere 20 Ìròyìn
Study the map and answer the question. The land-form feature at the centre of the map can best be described as
Awọn alaye Idahun
Ibeere 21 Ìròyìn
One basic mineral that is common to Sokoto, Ewekoro, Calabar and Nkalagu is
Awọn alaye Idahun
The basic mineral that is common to Sokoto, Ewekoro, Calabar, and Nkalagu is limestone. Limestone is a sedimentary rock that is composed mainly of calcium carbonate, which is a mineral that is commonly found in the Earth's crust. It is a very versatile mineral that has a wide range of applications, including in the construction industry, as a raw material for cement production, and in agriculture as a soil conditioner. Sokoto, Ewekoro, Calabar, and Nkalagu are all regions in Nigeria that have abundant deposits of limestone. The limestone in these areas is of high quality and is a significant source of revenue for the local economy. It is usually mined from quarries and then processed into various forms for its different uses. Therefore, the basic mineral that is common to all these areas is limestone, which is an essential raw material for various industries and is vital for economic growth and development.
Ibeere 22 Ìròyìn
Dodoma is to Tanzania as ______ to Nigeria
Awọn alaye Idahun
The answer is Abuja. Dodoma is the capital city of Tanzania, and similarly, Abuja is the capital city of Nigeria. Prior to Abuja, Lagos was the capital city of Nigeria. However, due to its rapidly growing population and other challenges, the government decided to move the capital to a more central location in the country, which is Abuja. Therefore, just as Dodoma serves as the political hub of Tanzania, Abuja serves as the political center of Nigeria.
Ibeere 23 Ìròyìn
A form of chemical weathering is__________
Awọn alaye Idahun
The form of chemical weathering is carbonation. Carbonation is a type of chemical weathering that occurs when carbon dioxide from the air reacts with minerals in rocks to form new compounds. This reaction causes the minerals in the rock to dissolve and the rock to become weaker and eventually break down into smaller pieces. This process is important in the formation of soil, as it helps break down rocks and minerals into smaller particles that can be easily transported and mixed into the soil.
Ibeere 24 Ìròyìn
Latitude 66 and half marks the____________
Awọn alaye Idahun
Latitude 66 and a half (66.5) marks the Arctic Circle. The Arctic Circle is an imaginary line that circles the Earth at approximately 66.5 degrees latitude, which is located in the northern hemisphere. This line marks the southernmost point at which the sun can remain continuously above or below the horizon for a full 24 hours, depending on the time of year. Therefore, if you are at a location with latitude 66.5 degrees or higher, it means that you are within the Arctic Circle and can experience the phenomenon of the midnight sun during the summer solstice, where the sun remains above the horizon for a full 24 hours. In contrast, during the winter solstice, the sun will not rise above the horizon at all, resulting in 24 hours of darkness. Hence, the correct answer is: - Arctic Circle
Ibeere 25 Ìròyìn
Along which latitude will be the day time be longest on Christmas day?
Awọn alaye Idahun
Ibeere 26 Ìròyìn
A broad-based population pyramid is composed mainly
Awọn alaye Idahun
A broad-based population pyramid is composed mainly of young dependants and active inhabitants. This means that there are more people in the younger age brackets (typically 0-14 years old) and a significant proportion of the population is in the working age bracket (typically 15-64 years old). The number of elderly people (typically 65 years and above) in this type of pyramid is relatively small. Broad-based population pyramids are typically associated with countries that have high birth rates and lower life expectancies. In these countries, the younger population tends to be larger and the older population tends to be smaller due to factors such as high infant mortality rates and shorter life spans. The larger working-age population in these countries can be a potential source of economic growth if they are able to find employment and contribute to the country's development.
Ibeere 27 Ìròyìn
The ocean that connects Europe and America is the__________
Awọn alaye Idahun
The ocean that connects Europe and America is the Atlantic Ocean. The Atlantic Ocean is the second-largest ocean in the world, after the Pacific Ocean. It covers an area of about 106 million square kilometers and is bordered by Europe and Africa to the east, and by North and South America to the west. The Atlantic Ocean is important for global trade, as it provides a shipping route between Europe and America, and also plays a major role in the Earth's climate system.
Ibeere 28 Ìròyìn
'It is universal and can reach almost every where'. Which transport mode is being referred to ?
Awọn alaye Idahun
The transport mode that is being referred to as universal and can reach almost everywhere is the road transport. Road transport refers to the movement of people, goods, or materials on roads using vehicles such as cars, buses, trucks, and motorcycles. The road network is extensive and well-developed in most parts of the world, making it possible for vehicles to reach even the most remote areas. Road transport is flexible and can adapt to different types of cargo, from small packages to large containers. It can also accommodate different types of trips, from short local trips to long-distance journeys. This versatility makes it an important mode of transport for both personal and commercial use. Overall, road transport is a crucial component of modern transportation systems and plays a significant role in the economy and daily life of people around the world.
Ibeere 29 Ìròyìn
Study the map and answer the question. The Area covered by the map is approximately
Awọn alaye Idahun
Ibeere 30 Ìròyìn
Which of the following winds affects the West Indian Islands of the Caribbean?
Awọn alaye Idahun
Wind is the perceptible natural movement of the air, especially in the form of a current of air blowing from a particular direction
Ibeere 31 Ìròyìn
Use the map below to answer the question. The most important minerals found in the area marked X are
Awọn alaye Idahun
Ibeere 32 Ìròyìn
If the time at the Greenwich Meridian is 11.00am, what would the local time be at a place 750W?
Awọn alaye Idahun
Time at GMT is 11am, 150 = 1 hour, 750 gives us 5 hours
The West looses, therefore
11am - 5hours = 6:00am.
Option D is the right answer, all other options are wrong
Ibeere 33 Ìròyìn
Study the map and answer the question. The bearing of Jata from Adaba is approximately
Awọn alaye Idahun
To determine the approximate bearing of Jata from Adaba using the map, we need to look at the compass rose and use the scale provided. Looking at the compass rose, we can see that North is pointing towards the top of the map. To find the bearing of Jata from Adaba, we need to draw a straight line from Adaba to Jata on the map, and then measure the angle between this line and North using a protractor. Measuring this angle, we can see that it is approximately 21 degrees. Therefore, the bearing of Jata from Adaba is approximately 21°. Note that this is an approximation since we are using a ruler and protractor on a printed map, which may not be completely accurate. Additionally, the actual bearing of Jata from Adaba may differ slightly depending on the specific route taken.
Ibeere 34 Ìròyìn
'It is a port that specializes in receiving and redistributing goods to the neighboring countries'. Which of the following ports is described in the preceding statement?
Awọn alaye Idahun
The port described in the statement is an Entrepôt. An entrepôt is a port or a place where goods are stored temporarily before being re-exported to other countries. It acts as a distribution center for goods, receiving them from one place and then redistributing them to other places. A ferry port is a place where ferries arrive and depart, carrying passengers and vehicles across bodies of water. An outport is a smaller port that is located away from the main port and is usually used for loading and unloading goods. A river port is a port located on a river and is used for loading and unloading goods and passengers along the river.
Ibeere 35 Ìròyìn
The innermost section of the Earth is the__________
Awọn alaye Idahun
The innermost section of the Earth is the core. The Earth's core is the central part of our planet, located beneath the mantle. It is composed primarily of iron and nickel, and is divided into two distinct layers: the outer core and the inner core. The outer core is a liquid layer that surrounds the solid inner core. The inner core is a solid, dense ball of metal that is about the size of the Moon. The core plays a crucial role in the Earth's magnetic field, which helps protect our planet from harmful solar radiation. The core also generates the heat that drives the movement of the Earth's tectonic plates, which causes earthquakes and volcanic eruptions. Understanding the properties and behavior of the Earth's core is an important area of research in the field of geophysics.
Ibeere 36 Ìròyìn
Lines joining places with same mean annual rainfall are called___________
Awọn alaye Idahun
Lines joining places with the same mean annual rainfall are called isohyets. Isohyets are lines drawn on a map connecting points that receive the same amount of rainfall in a year. The word "isohyet" comes from the Greek words "iso" meaning "equal" and "hyetos" meaning "rain". These lines help us understand the patterns and distribution of rainfall over a certain area, and can be useful for various purposes such as agriculture, water management, and meteorology.
Ibeere 37 Ìròyìn
The greatest volcanic regions of Africa are found in
Awọn alaye Idahun
The greatest volcanic regions of Africa are found in two main areas: Kenya and Tanzania, and Sudan and Ethiopia. In Kenya and Tanzania, the Great Rift Valley runs through the region and is home to some of the most iconic volcanic features on the continent. The valley is characterized by a series of interconnected volcanoes, hot springs, geysers, and lakes. The most famous volcanic peaks in the area are Mount Kilimanjaro, Mount Kenya, and Mount Meru. In Sudan and Ethiopia, the East African Rift Valley also runs through the region and is another hotspot for volcanic activity. The valley is home to a number of active and dormant volcanoes, including Erta Ale, Nyiragongo, and Mount Karthala. In addition, the region is known for its geothermal activity, with numerous hot springs and geysers dotting the landscape. Both of these regions are characterized by their tectonic activity, with the movement of the Earth's crust leading to the formation of rift valleys, which in turn create the conditions for volcanic activity. The result is a stunning and unique landscape that draws visitors from all over the world.
Ibeere 38 Ìròyìn
In which of the following countries is cotton growing under irrigation the mainstay of the agricultural economy?
Awọn alaye Idahun
Cotton growing under irrigation is the mainstay of the agricultural economy in Sudan. Sudan is one of the largest producers of cotton in Africa and the world, and cotton farming is a major part of its agricultural economy. The country has a long history of growing cotton, with the industry dating back to the early 20th century. Cotton farming in Sudan is mainly done under irrigation due to the arid climate in most parts of the country. The irrigated areas for cotton farming are mainly found in the central and eastern regions of the country, such as the Gezira Scheme, which is one of the largest irrigation projects in the world. Cotton is a major export commodity for Sudan, and the industry employs a significant portion of the country's population. The government has made efforts to promote and support the cotton industry, with initiatives such as providing subsidies to farmers and investing in research and development to improve cotton production and quality. In summary, cotton growing under irrigation is the mainstay of the agricultural economy in Sudan, due to its favorable climate for cotton farming, long history of cotton production, and significant export earnings from the cotton industry.
Ibeere 40 Ìròyìn
All the following are examples of intrusive volcanic features except____________
Awọn alaye Idahun
Intrusive vulcanicity involves the solidification of molten magma within the earth's crust
Ṣe o fẹ tẹsiwaju pẹlu iṣe yii?