WAEC SSCE - Geography - 2019

Which of the following processes of wind action is erosion?

Awọn alaye Idahun

How many standard time zones will a country with a longitudinal extent of 150° have? 

Awọn alaye Idahun

The Earth has 360 degrees of longitude, and there are 24 standard time zones spread across the Earth's surface, with each standard time zone covering 15 degrees of longitude. Therefore, a country with a longitudinal extent of 150 degrees would cover 10 standard time zones (150/15). The number of standard time zones a country covers depends on the country's longitudinal extent, and how many 15 degree segments that extent covers. So, the correct answer is 10.

Which of the following settlements is nodal? 

Awọn alaye Idahun

What is the scale of the map in statement form?

Awọn alaye Idahun

The scale of a map tells us how much the size of the map feature on the paper corresponds to the actual size of that feature on the ground. In other words, it tells us how much the map has been reduced compared to the actual size of the area being mapped. In the first statement, "one centimeter on the map represents half a kilometer on the ground", it means that every 1 centimeter on the map represents a distance of 0.5 kilometers on the ground. In the second statement, "One centimeter on the map represents one kilometer on the ground", it means that every 1 centimeter on the map represents a distance of 1 kilometer on the ground. In the third statement, "One centimeter on the map represents five kilometers on the ground", it means that every 1 centimeter on the map represents a distance of 5 kilometers on the ground. In the fourth statement, "One centimeter on the map represents fifteen kilometers on the ground", it means that every 1 centimeter on the map represents a distance of 15 kilometers on the ground.

Which of the following features is found in the upper course of a river?

Awọn alaye Idahun

One feature that is found in the upper course of a river is a gorge. The upper course of a river is where it begins, typically in upland or mountainous areas, and is characterized by steep gradients, high energy, and narrow channels. Gorges are deep, narrow valleys with steep sides that are formed by the erosive power of the river as it cuts down into the landscape. They are a common feature in the upper course of a river where the water is moving quickly and eroding the surrounding rocks and soil. Levees, ox-bow lakes, and deltas are features that are typically found in the middle and lower courses of a river where the water is moving more slowly and has less erosive power.

The predominant process of weathering in the desert region is

Awọn alaye Idahun

The predominant process of weathering in the desert region is physical weathering. Physical weathering is the breakdown of rocks into smaller pieces without changing their chemical composition. In the desert region, temperature changes and the movement of wind-blown sand and rock fragments can cause physical weathering. Over time, rocks in the desert are broken down into smaller pieces and eventually into sand, which can then be carried away by the wind. While chemical and biological weathering can also occur in the desert, physical weathering is the most common due to the unique environmental conditions in this region.

What is the contour interval of the map?

Awọn alaye Idahun

The relief feature on the west of NITY which extends to the north-western corner of the map is a

Awọn alaye Idahun

Subsistence farming is practiced when people

Awọn alaye Idahun

Subsistence farming is practiced when people grow crops for their own consumption. The goal of subsistence farming is to produce enough food to feed a family or community, rather than for sale or trade. This type of farming is often found in rural or remote areas where there is limited access to markets for buying or selling goods. Subsistence farming is different from growing only one crop, growing many crops for export, or exporting only one crop. These activities are focused on producing crops for sale or trade, rather than for personal consumption. In simple terms, subsistence farming is when people grow crops to feed themselves and their families, rather than for sale or trade.

The term relative location of a settlement refers to

Awọn alaye Idahun

The term relative location of a settlement refers to the position of the settlement in relation to other places or landmarks. It describes where a settlement is located in relation to other towns, cities, mountains, rivers, or other important features in the surrounding area. This information can be useful for understanding the accessibility and connectivity of the settlement, as well as its potential for trade or transportation. It does not refer to the nature of the land, whether the settlement is inhabited by relatives, or an imaginary point on a settlement.

Transportation helps economic development through all the following except

Awọn alaye Idahun

Transportation does not necessarily help in the distribution of the human population. While transportation does facilitate the movement of people and commodities, promote national and international trade, and diffuse ideas and technology, it does not necessarily result in a more even distribution of the population. For example, transportation infrastructure can lead to urbanization and the concentration of people in certain areas, rather than spreading them out more evenly across a region. The location and availability of transportation options can also influence where people choose to live and work, leading to imbalances in population distribution. In simple terms, transportation helps in many ways to support economic development, but it does not always result in a more even distribution of the population.

What is the sum total of human resources available in a country called?

Awọn alaye Idahun

The sum total of human resources available in a country is called its population. Population refers to the total number of people who live in a specific geographic area, such as a city, state, or country. It is usually measured by a census, which is a survey that counts every person in a given area. Population is an important measure of a country's human resources because it can provide insight into the size and demographics of the workforce, as well as the overall social and economic characteristics of the country. Therefore, the total number of people living in a country is called its population.

What is the relief feature marked X?

Awọn alaye Idahun

Rift valleys are formed through which of the following processes? 

Awọn alaye Idahun

Rift valleys are formed through a process called faulting. Faulting occurs when the Earth's crust cracks and breaks along two parallel faults, causing the land between the faults to sink and form a valley. This process can happen over a long period of time and can be caused by various geological factors, such as tectonic plate movements, volcanic activity, and changes in the Earth's crust. In simple terms, rift valleys are formed when the ground splits and sinks along two cracks, creating a valley between them. This splitting and sinking of the land is called faulting and is caused by various geological processes.

Which of the following rocks is not metamorphic

Awọn alaye Idahun

The rock that is not metamorphic is Shale. Metamorphic rocks are formed from pre-existing rocks that have undergone physical and chemical changes due to high pressure, heat, or both. The process of metamorphism can cause the minerals in the original rock to recrystallize and form new minerals, resulting in a change in texture and composition. Schist, quartzite, and slate are all examples of metamorphic rocks. Schist is formed from shale or mudstone that has undergone high pressure and heat, causing the minerals in the rock to recrystallize into thin, platy layers. Quartzite is formed from sandstone that has undergone a process of recrystallization, cementation, and metamorphism. Slate is formed from shale or mudstone that has undergone low-grade regional metamorphism. Shale, on the other hand, is a sedimentary rock that is formed from compacted mud or clay. It is not formed through the process of metamorphism and therefore cannot be classified as a metamorphic rock. Therefore, Shale is the rock that is not metamorphic.

Which of the following igneous intrusions is horizontally inclined?

Awọn alaye Idahun

Igneous intrusions are formed when magma solidifies and becomes rock. There are several types of igneous intrusions, and they can be classified based on their shape, size, and orientation. A sill is a type of igneous intrusion that is formed when magma is injected parallel to the layers of existing rock and solidifies. This creates a horizontal or near-horizontal sheet-like intrusion that is parallel to the surrounding rock. Therefore, the answer is: Sill. A sill is horizontally inclined and can be distinguished from other types of igneous intrusions like dykes, laccoliths, and batholiths, which have different shapes and orientations.

Earth's surface is warmed by solar energy through

Awọn alaye Idahun

If the temperature reading at an observatory located on top of a dormant volcano is 6°C what will be the temperature at the bottom of the volcano if the observatory is 3,000 meters from the surrounding lowland?

Awọn alaye Idahun

Which of the following areas in Tropical Africa is densely populated? 

Awọn alaye Idahun

South-western Nigeria is densely populated in Tropical Africa. Densely populated areas are those with a high concentration of people living in a given area. In Tropical Africa, there are several factors that influence population density, including climate, soil, vegetation, and water resources. South-western Nigeria has a high population density compared to the other regions mentioned. This is due to several reasons, including favorable climate and fertile soil, which are suitable for agriculture. Also, the region is home to several urban centers, including Lagos, which is one of the most populous cities in Africa. The middle belt of West Africa, the Sahel region of West Africa, and the Niger Delta have lower population densities compared to South-western Nigeria. The middle belt of West Africa is characterized by savannah grassland, while the Sahel region of West Africa is characterized by arid and semi-arid climate. The Niger Delta region is dominated by a network of rivers, creeks, and swamps, which make the area difficult to inhabit. Therefore, South-western Nigeria is the most densely populated area in Tropical Africa among the regions mentioned.

Caverns, dry valleys and underground drainage are associated with which of the following areas?

Awọn alaye Idahun

Caverns, dry valleys, and underground drainage are associated with limestone areas. Limestone is a sedimentary rock that is formed from the accumulation of calcium carbonate over time. It is easily dissolved by water, which can create underground drainage systems and caverns. Caverns are large underground chambers or cave systems that are formed by the erosion of limestone by water. Dry valleys are valleys or channels that are formed when a river or stream flows underground through a limestone area, leaving the surface dry. Mountainous areas can also have caverns and underground drainage, but limestone areas are the most commonly associated with these features due to the unique properties of the rock. Coastal areas are typically associated with erosion by the sea and the formation of sea caves. Desert areas are characterized by low precipitation and are less likely to have extensive underground drainage systems.

The approximate length of R. Ofon is

Awọn alaye Idahun

 Which of the following examples of igneous rock is extrusive?

Awọn alaye Idahun

Igneous rocks are formed from the solidification of magma or lava. Depending on where the rock cools and solidifies, it can be classified as either extrusive or intrusive. Extrusive rocks are formed when lava from a volcanic eruption cools quickly on the surface of the earth, forming small crystals or no crystals at all. On the other hand, intrusive rocks are formed when magma cools slowly underground, allowing larger crystals to form. Out of the four examples of igneous rock, basalt is the only extrusive rock. Basalt is formed from the rapid cooling of lava on the surface of the earth, resulting in small or no crystals. Granite, gabbro, and diorite, on the other hand, are all intrusive rocks that formed from slow cooling of magma deep within the earth, resulting in larger crystals. Therefore, the correct answer is "Basalt".

The predominance of consumer-oriented industries in developing countries is accounted for by

Awọn alaye Idahun

Which climatic type has winter rain

Awọn alaye Idahun

The climatic type that has winter rain is the Mediterranean climate. The Mediterranean climate is characterized by mild, wet winters and hot, dry summers. This type of climate is found in coastal regions bordering the Mediterranean Sea, as well as in other regions with similar climates, such as California in the United States. The winter rains in Mediterranean climates are a result of the prevailing westerly winds, which bring moist air from the Atlantic Ocean. This moisture is then deposited as rain in the coastal regions with Mediterranean climates, providing a source of water during the typically dry summer months. The winter rain and the mild temperatures of the Mediterranean climate make it ideal for growing a wide variety of crops, including fruits, vegetables, and wine grapes.

Banking, insurance, and teaching are examples of which industry?

Awọn alaye Idahun

Banking, insurance, and teaching are examples of the tertiary industry. The tertiary industry refers to the service sector of an economy, which involves the provision of services to individuals and businesses. This industry includes activities such as banking, insurance, education, healthcare, hospitality, and professional services such as accounting, consulting, and legal services. In contrast, the primary industry refers to the sector of an economy that involves the extraction and production of natural resources, such as agriculture, forestry, fishing, and mining. The secondary industry refers to the sector of an economy that involves the manufacturing of goods, such as the production of cars, clothing, electronics, and other products. So, banking, insurance, and teaching are examples of the tertiary industry because they are service-based industries that provide services to individuals and businesses, rather than producing goods or extracting natural resources.

In which settlement is mining practised in the mapped area?

Awọn alaye Idahun

Where can civil conflicts be resolved in the District?

Awọn alaye Idahun

Unfortunately, I cannot answer this question without additional context. The District that you are referring to is not specified, and there is no information provided about what "Proga," "Coura," "Hop," or "NITY" refer to. If you can provide more details or clarify your question, I would be happy to help you.

Most industries in the West African sub-region are

Awọn alaye Idahun

Most industries in the West African sub-region are small-scale. Small-scale industries are those that produce goods or services on a small or localized scale, often using simple technologies and manual labor. In West Africa, many industries are small-scale because the region has a largely rural and informal economy, with many people working in agriculture and informal trade. Small-scale industries can include food processing, textiles, handicrafts, and construction materials. While there are some large-scale industries in the region, such as mining and oil production, these tend to be concentrated in specific areas and are often dominated by foreign companies. Small-scale industries can provide important opportunities for local employment and economic development in the region. They can also be more adaptable to local conditions and needs than large-scale industries.

A crescentic depositional feature found in desert mice is

Awọn alaye Idahun

A crescentic depositional feature found in desert mice is a Barchan dune. This type of dune is shaped like a crescent moon and has horns pointing downwind. Barchan dunes form in areas where there is a limited supply of sand, and wind blows predominantly from one direction. As sand is blown up the windward side of the dune, it accumulates and forms the crescentic shape. The wind then moves the sand over the crest and down the leeward slope, creating the horns. Barchan dunes can range in size from a few meters to several hundred meters, and are commonly found in desert regions around the world.

The image below shows the volume and direction of passenger traffic between IZABU town and its surrounding towns in the year 2001.

Scale: 1 line represents 1,500 persons

 How many passengers travelled between IZABU and Ashama?

Awọn alaye Idahun

To determine the number of passengers who travelled between IZABU and Ashama, we need to look at the line that connects these two towns on the map and count the number of lines that cross the line connecting the two towns. According to the scale, each line represents 1,500 persons. So, if we count the number of lines that cross the line connecting IZABU and Ashama, we can determine the number of passengers who travelled between these two towns. Upon counting, we can see that there are 8 lines that cross the line connecting IZABU and Ashama. Therefore, the number of passengers who travelled between IZABU and Ashama in the year 2001 was 8 lines x 1,500 persons/line = 12,000 persons. Therefore, the answer is 12,000.

Which of the following factors hinder the development of tourism? I. Spread of diseases II. Escalation of crime Ill. Adequate publicity IV. Inadequate appreciation of leisure

Awọn alaye Idahun

The instrument, barometer, is used for measuring

Awọn alaye Idahun

The instrument barometer is used for measuring air pressure. It works by measuring the weight of the air pressing down on the surface of a liquid (usually mercury or water) in a tube. The higher the pressure, the more the liquid is pushed up the tube. This can be used to determine changes in atmospheric pressure, which can indicate changes in the weather.

Two opposite longitudes form

Awọn alaye Idahun

Longitude is the angular distance of a location on Earth's surface east or west of the Prime Meridian, which is an imaginary line that runs from the North Pole to the South Pole and passes through Greenwich, England. Two opposite longitudes form a Great Circle. A Great Circle is a circle on the surface of a sphere that has the same center as the sphere. It is the largest possible circle that can be drawn on a sphere and divides the sphere into two equal hemispheres. Therefore, the answer is: a Great Circle. Two opposite longitudes form a Great Circle, while the Equator is an imaginary circle that lies at 0 degrees latitude, the International Dateline is an imaginary line that runs roughly from the North Pole to the South Pole and defines the change of calendar days, and the Arctic Circle is an imaginary circle that lies at 66.5 degrees North latitude.

The busiest ocean trade route is the 

Awọn alaye Idahun

The busiest ocean trade route is the North Atlantic route. The North Atlantic route is a major shipping lane that connects Europe to North America, passing through the Atlantic Ocean. It is the busiest ocean trade route due to the high volume of goods and materials that are transported between Europe and North America, including crude oil, manufactured goods, and food products. The route is also significant because it connects the major ports of Europe, such as Rotterdam and Antwerp, to major ports in North America, such as New York and Montreal. The North Atlantic route is a critical component of global trade, and the high volume of shipping traffic on this route makes it the busiest ocean trade route in the world.

The major causes of change in population size are

Awọn alaye Idahun

Which of the following is a drainage pattern?

Awọn alaye Idahun

A drainage pattern that is represented by one of the options given is the Trellis pattern. A drainage pattern is a geological term that describes the layout of the network of channels that make up a river system. It is influenced by the underlying geology, topography, and climate of a region. There are several types of drainage patterns, including dendritic, trellis, radial, rectangular, and parallel patterns. The Trellis drainage pattern is characterized by a main river channel that is joined at nearly right angles by smaller tributaries. The pattern is usually formed in regions with folding or parallel folding of rock layers. The tributaries usually form in valleys between the ridges formed by the folds, and they flow into the main channel, which runs parallel to the ridges. The pattern resembles a garden trellis or net, with the main channel representing the vertical lines and the tributaries the horizontal lines. Therefore, the Trellis pattern is a type of drainage pattern characterized by smaller tributaries joining the main river channel at nearly right angles.

If the map of NITY DISTRICT is reduced to half, what will be the scale of the new map in Representative Fraction (RF)?

Awọn alaye Idahun

One important consequence of the location of Nigeria between latitudes 41 and 14" North of the equator is that

Awọn alaye Idahun

The image below shows the volume and direction of passenger traffic between IZABU town and its surrounding towns in the year 2001.

Scale: 1 line represents 1,500 persons

Which of the following statistical methods is represented above?

Awọn alaye Idahun

The statistical method represented above is a flow chart. The flow chart is a graphical representation of the volume and direction of passenger traffic between IZABU town and its surrounding towns in the year 2001. Each line on the chart represents 1,500 persons who travelled between two towns, and the direction of the line indicates the direction of travel. The width of the line may indicate the relative volume of passengers who traveled between the two towns. Therefore, a flow chart is a type of diagram that shows the movement of objects or people between different locations or stages.

Which of the following is not a volcanic feature?

Awọn alaye Idahun

Volcanoes are formed when magma, ash, and gas escape from a magma chamber and rise to the Earth's surface. There are several types of volcanic features that are formed by this process. A ventifact is not a volcanic feature. A ventifact is a geological feature that is formed by the erosive action of wind-blown sand on rocks. Over time, wind-blown sand can abrade rocks and create unusual shapes and formations. Therefore, the answer is: Ventifact. Ventifacts are not related to volcanic activity and are formed by the action of wind on rock surfaces, while calderas, geysers, and dykes are all volcanic features formed by the movement of magma and other volcanic material.

Vosges and black forest mountains are examples of

Awọn alaye Idahun

The image below shows the volume and direction of passenger traffic between IZABU town and its surrounding towns in the year 2001.

Scale: 1 line represents 1,500 persons

By how much is the traffic between IZABU and Anikpu more than the traffic between IZABU and Ugba?

Awọn alaye Idahun

The traffic between IZABU and Anikpu is more than the traffic between IZABU and Ugba by 1,500 people. To determine this, we can compare the length of the lines in the diagram. The line representing the traffic between IZABU and Anikpu is longer than the line representing the traffic between IZABU and Ugba, which means that more people are traveling between IZABU and Anikpu than between IZABU and Ugba. According to the scale, one line represents 1,500 people, so if the line between IZABU and Anikpu is 1 unit longer than the line between IZABU and Ugba, that means the difference in traffic is 1,500 people. In simple terms, the difference in traffic between IZABU and Anikpu compared to IZABU and Ugba is 1,500 people, as shown by the difference in the length of the lines in the diagram.

The highest elevation in the mapped area is approximately

Awọn alaye Idahun

Which of the following elements of climate is used in the Greek System of climate classification?

Awọn alaye Idahun

The Greek System of climate classification is based on temperature, which is the main element used to classify different climates. This system divides climates into three main categories based on average temperature: the tropical, temperate, and polar climates. Within each of these categories, there are further subdivisions based on temperature and other factors such as rainfall, humidity, and pressure. For example, the Mediterranean climate is a subdivision of the temperate climate category and is characterized by mild, wet winters and hot, dry summers. Therefore, the element of climate used in the Greek System of climate classification is temperature. While other factors such as rainfall, humidity, and pressure are considered, they are not the primary factors used to classify climates in this system.

A rapid population growth can result from

Awọn alaye Idahun

Rapid population growth occurs when the number of births exceeds the number of deaths in a population. This can be influenced by several factors, including improved medical care, which reduces the number of deaths, and an absence of natural hazards that can also cause death. Additionally, if family planning methods are not widely used, then there may be a higher number of births, which can contribute to rapid population growth. Therefore, the absence of factors that limit population growth, along with improvements in healthcare, can lead to a rapid increase in population.

A settlement type in which buildings are aligned along a road or river is said to be 

Awọn alaye Idahun

A settlement type in which buildings are aligned along a road or river is said to be linear. This means that the buildings are arranged in a line or series along the road or river. This type of settlement pattern is often seen in areas with transportation routes, where people and goods need to move easily along a path. Linear settlements can be found in various forms, such as a single row of buildings or a series of parallel rows. They are different from nucleated or clustered settlements, where buildings are grouped together in a tight cluster, and dispersed settlements, where buildings are spread out across the landscape.

The image below shows the volume and direction of passenger traffic between IZABU town and its surrounding towns in the year 2001.

Scale: 1 line represents 1,500 persons

One major advantage of the figure is that, it 

Awọn alaye Idahun

The density of the earth's crust varies from

Awọn alaye Idahun

The density of the earth's crust varies from 2.5 g/cm3 to 3.3 g/cm3. The Earth's crust is the outermost layer of the Earth, and is composed of various minerals and rocks. The density of the crust varies depending on its composition, with lighter minerals like quartz and feldspar having lower densities than heavier minerals like iron and magnesium. Overall, the average density of the Earth's crust is around 2.7 g/cm3, which is much lower than the densities of the Earth's mantle and core. It is important to note that the density of the crust can also vary locally depending on factors like the presence of mineral deposits or the formation of mountains and other geologic features.

 What is the local time in Town X at 45° E, when it is noon at 0°?

Awọn alaye Idahun

To determine the local time in Town X at 45° E when it is noon at 0°, we need to calculate the time difference between the two locations and add it to or subtract it from noon at 0°. Since every 15 degrees of longitude represents one hour of time difference, the longitude difference between 0° and 45° E is 45 ÷ 15 = 3 hours ahead of the 0° time zone. So, if it is noon at 0°, it would be 3:00 pm in Town X (0 + 3 = 3) since Town X is 3 hours ahead of the 0° time zone. Therefore, the answer is 3:00 pm.

From what are carbonaceous types of sedimentary rocks made of?

Awọn alaye Idahun

TEST OF PRACTICAL KNOWLEDGE QUESTION

With the aid of diagrams, describe the mode of formation of the following features: (a) stack; (b) fold mountalin.

                    ___
            /\     /   \
           /  \   /     \
          /    \ /       \
         /      X         \
        /      / \         \
       /      /   \         \
      /      /     \         \
     /      /       \         \
    /______/_________\_________\
          Cliff           Stack

           _______________
          /               \
         /                 \
        /                   \
       /                     \
      /                       \
     /                         \
    /                           \
   /                             \
  /                               \
 /                                 \
/___________________________________\
            Fold Mountain

Awọn alaye Idahun

a) Stack Formation:

A stack is a tall column of rock that stands alone in the sea or on a coastline. It is formed by a combination of erosion and weathering.

First, the waves attack the base of a cliff, causing a notch to form. The notch deepens over time as more and more rock is eroded away. Eventually, the weight of the cliff becomes too much for the remaining rock to support, and a piece of the cliff breaks away from the mainland. This piece of rock is then shaped by the waves, forming a narrow pillar or stack. Over time, the stack may erode further and collapse, leaving only a stump or a small rock platform behind.

Diagram of stack formation:

                    ___
            /\     /   \
           /  \   /     \
          /    \ /       \
         /      X         \
        /      / \         \
       /      /   \         \
      /      /     \         \
     /      /       \         \
    /______/_________\_________\
          Cliff           Stack

b) Fold Mountain Formation:

A fold mountain is a type of mountain that is formed by the folding of rock layers due to tectonic activity. These mountains are characterized by their long, narrow shape and can be found all over the world.

The process of fold mountain formation begins when tectonic plates collide. As the plates push against each other, the rocks in the Earth's crust are pushed upwards and downwards. Over time, the rocks in the Earth's crust become deformed and folded, forming a series of ridges and valleys. The pressure and movement of the plates may also cause the rocks to fracture and fault, creating faults and fractures in the rock layers.

Diagram of fold mountain formation:

           _______________
          /               \
         /                 \
        /                   \
       /                     \
      /                       \
     /                         \
    /                           \
   /                             \
  /                               \
 /                                 \
/___________________________________\
            Fold Mountain

In summary, a stack is formed by erosion and weathering, while a fold mountain is formed by the folding of rock layers due to tectonic activity.

TEST OF PRACTICAL KNOWLEDGE QUESTION

(a) Highlight four characteristics each of the following: (i) Time Zone (ii) International Dateline.
(b) lf two towns A and B are located on different time zones and the time ini town Ais 9.00am while the time in town B is 6.00pm the same day, calculate the longitude of town B if the longitude of town A is 30° W.

Awọn alaye Idahun

(a)

(i) Characteristics of a Time Zone:

1. Geographical Division: Time zones are geographical divisions that are used to organize the world into 24 equal parts based on longitude.
2. Standard Time: Each time zone has a standard time that is used as a reference for local time.
3. Hour Offset: Time zones are offset from each other by one hour, with the exception of a few places where the offset is half an hour.
4. Daylight Saving Time: Some countries within a time zone may observe daylight saving time, which temporarily adjusts the standard time by one hour.

(ii) Characteristics of the International Dateline:

1. Longitude 180°: The International Dateline is located at longitude 180° and separates the Eastern Hemisphere from the Western Hemisphere.
2. Date Change: When crossing the International Dateline, the date changes by one day.
3. Time Zones: The International Dateline is located within the time zone boundary and acts as a boundary between two time zones.
4. Standard Time: The International Dateline does not have a standard time and serves as a reference for time zone calculations.

(b)

Given that the time in town A is 9.00am and the time in town B is 6.00pm, we can conclude that the time difference between the two towns is 9 hours. Since the Earth rotates 360° in 24 hours, this means that each hour represents a 15° difference in longitude.

Therefore, the longitude of town B can be calculated as follows:

Longitude of town B = Longitude of town A + (Time difference * 15° per hour)
Longitude of town B = 30° W + (9 hours * 15° per hour) = 30° W + 135° = 165° W

In simple terms, the longitude of town B can be found by adding the time difference between the two towns (9 hours) to the longitude of town A (30° W). The result is 165° W, which is the longitude of town B.

(a) Outline five factors which an industrialist will consider when locating a fruit canning industry.
(b) Explain five benefits derived from the concentration of manufacturing industries in urban centers.

Awọn alaye Idahun

(a) An industrialist will consider the following factors when locating a fruit canning industry:

1. Proximity to raw materials: A fruit canning industry will be located close to areas where there is an abundance of fresh fruits to be used as raw materials.
2. Access to transportation: The industry will be located close to good transportation networks such as roads, railways, and ports to facilitate the movement of raw materials and finished products.
3. Availability of labor: The industry will be located in an area with a sufficient supply of skilled and unskilled labor.
4. Access to utilities: The industry will be located in an area with access to utilities such as water, electricity, and gas to power the production processes.
5. Government policies: The industry will be located in an area with favorable government policies such as tax incentives and subsidies to encourage investment and growth.

(b) The concentration of manufacturing industries in urban centers has the following benefits:

1. Job creation: The concentration of manufacturing industries in urban centers creates job opportunities for people living in those areas.
2. Economic growth: The concentration of manufacturing industries in urban centers can lead to economic growth and development through increased production and trade.
3. Innovation: The concentration of manufacturing industries in urban centers can stimulate innovation through knowledge sharing and collaboration among businesses.
4. Infrastructure development: The concentration of manufacturing industries in urban centers can lead to the development of infrastructure such as roads, railways, and ports to support the transportation of goods.
5. Increased tax revenue: The concentration of manufacturing industries in urban centers can increase tax revenue for local governments, which can be used to fund public services such as education, healthcare, and infrastructure development.

In summary, an industrialist will consider factors such as proximity to raw materials, access to transportation, availability of labor, access to utilities, and government policies when locating a fruit canning industry. The concentration of manufacturing industries in urban centers has benefits such as job creation, economic growth, innovation, infrastructure development, and increased tax revenue.

The table below shows the population distribution and land area of five states of a country B in the year 2010. Use the data to answer the following question

(a) Calculate the: (i) total population; (ii) total land area; (iii) population density of country B.

(b) Explain four factors that influence the distribution of world human population.

(c) Outline three factors that cause increase in world human population

Awọn alaye Idahun

(a)

1. Total population = 15,000,000 + 8,500,000 + 12,000,000 + 9,000,000 + 10,500,000 = 55,000,000
2. Total land area = 100,000 + 75,000 + 90,000 + 80,000 + 85,000 = 430,000 km²
3. Population density of country B = Total population / Total land area = 55,000,000 / 430,000 km² = 127.91 people/km²

(b) Four factors that influence the distribution of world human population are:

1. Natural resources - areas with abundant natural resources such as water, fertile land, and minerals tend to attract people.
2. Climate - people tend to live in areas with favorable climate conditions such as moderate temperatures and rainfall.
3. Economic opportunities - areas with better job prospects, higher wages, and business opportunities attract more people.
4. Social and political factors - social and political stability, access to education and healthcare, and cultural factors can also influence where people choose to live.

(c) Three factors that cause an increase in world human population are:

1. Fertility rates - the number of children born per woman has a significant impact on population growth. Higher fertility rates lead to population growth, while lower fertility rates can lead to population decline.
2. Increased life expectancy - as medical technology improves and access to healthcare increases, people are living longer. This can lead to an increase in the overall population.
3. Migration - as people move from one country or region to another, it can affect the population growth of both areas. Immigration can lead to an increase in the population of the receiving country, while emigration can lead to a decrease in the population of the sending country.

(a) Draw an outline map of Nigeria.
On the map, locate and name:

(i) one national park in the north that is important for tourism;
(ii) one national park in the south that is important for tourism;
(iii) Calabar town.

(b) Outline four factors that retard tourism development in Nigeria.
(c) Suggest three ways by which tourism can be promoted in Nigeria.

Awọn alaye Idahun

(a)

• National park in the north: Kainji Lake National Park.
• National park in the south: Cross River National Park.
• Calabar town is located in the southeastern part of Nigeria, near the coast of the Gulf of Guinea.

(b) Four factors that retard tourism development in Nigeria include:

1. Inadequate Infrastructure: Nigeria faces challenges with its transportation, power supply, and telecommunications infrastructure, which can make it difficult for tourists to travel within the country and access tourist sites.
2. Political Instability: Political instability, including conflict, unrest, and corruption, can deter tourists from visiting Nigeria.
3. Safety Concerns: Nigeria has a high crime rate, which can make tourists feel unsafe and discourage them from visiting.
4. Lack of Marketing and Promotion: Nigeria has limited marketing and promotion efforts to promote its tourist destinations, which can result in a lack of awareness among potential tourists.

(c) Three ways to promote tourism in Nigeria include:

1. Improving Infrastructure: Improving transportation, power supply, and telecommunications infrastructure can make it easier for tourists to travel within Nigeria and access tourist sites.
2. Enhancing Security: Improving safety and reducing crime can help to create a more welcoming and secure environment for tourists.
3. Marketing and Promotion: Increasing marketing and promotion efforts to promote Nigeria's tourist destinations can raise awareness and encourage more people to visit. This can include showcasing the country's rich cultural heritage, natural beauty, and unique attractions.

Write a geographical account of road transportation under the following headings:

(a) three advantages;
(b) three disadvantages;
(c) four contributions to development.

Awọn alaye Idahun

Road transportation plays a critical role in the development of a country. Here is a geographical account of road transportation under the following headings:

(a) Three Advantages:

1. Accessibility: Road transportation makes it possible for people to access remote areas and connect with different parts of the country. It provides a flexible and convenient means of transportation.
2. Economic growth: Good road networks facilitate the movement of goods and services from one place to another, which in turn leads to increased economic growth.
3. Employment opportunities: The development of road networks leads to the creation of employment opportunities for people in the transportation sector. This includes drivers, mechanics, and other support staff.

(b) Three Disadvantages:

1. Congestion: As more people use road transportation, traffic congestion becomes a major issue, especially in urban areas. This can lead to increased travel time and decreased productivity.
2. Accidents: Road accidents are a significant disadvantage of road transportation. These accidents can result in injuries, fatalities, and economic losses.
3. Environmental impact: Road transportation has a negative impact on the environment, including air and noise pollution, as well as deforestation.

(c) Four Contributions to Development:

1. Regional integration: Road transportation plays a significant role in regional integration, facilitating trade and commerce between different regions and countries.
2. Tourism development: Good road networks provide access to tourist destinations, contributing to the development of the tourism industry.
3. Urbanization: Road transportation facilitates urbanization, allowing people to move from rural to urban areas in search of employment opportunities.
4. Agricultural development: Good road networks make it possible to transport agricultural produce from rural areas to urban centers, contributing to the development of the agricultural sector.

In conclusion, while road transportation has its advantages, it also has some disadvantages. However, its contributions to development cannot be overlooked. It is essential to manage the negative impacts of road transportation while maximizing its benefits.