WAEC SSCE - Geography - 2014

Which of the following best explains why limestone areas are often dry?

Awọn alaye Idahun

Limestone areas are often dry because rainwater easily percolates through the porous limestone rocks. Limestone is a type of sedimentary rock that is formed from the accumulation of calcium carbonate shells and skeletons of marine organisms. This rock is highly porous and permeable, allowing water to easily flow through it. As a result, there is little surface water in limestone areas, and most of the water is stored underground in aquifers. This makes limestone areas prone to drought and often results in dry conditions. Therefore, the option that best explains why limestone areas are often dry is "Rain water percolates easily through limestone rocks".

The angular distance of a point on the Earth's surface measured in degrees from the centre of the Earth east or west of the Greenwich Meridian is known as

Awọn alaye Idahun

The angular distance of a point on the Earth's surface measured in degrees from the centre of the Earth east or west of the Greenwich Meridian is known as longitude. Longitude lines run from the North Pole to the South Pole, and the prime meridian, or zero longitude, runs through the Royal Observatory in Greenwich, London. Longitude is used together with latitude to specify the geographic coordinates of a location on the Earth's surface, and it is an essential element in navigation and timekeeping.

Which type of rock are quartzite, schist and marble?

Awọn alaye Idahun

Quartzite, schist, and marble are all examples of metamorphic rocks. Metamorphic rocks are formed from pre-existing rocks (either igneous, sedimentary, or other metamorphic rocks) that have been subjected to high pressure, temperature, or both. These conditions cause the minerals and texture of the original rock to change, forming a new rock with different physical and chemical properties. Quartzite, schist, and marble are all formed by different degrees of metamorphism, which is why they have distinct characteristics and are classified as separate types of metamorphic rock.

Which of the following is the smallest from of settlement?

Awọn alaye Idahun

The smallest form of settlement is a farmstead. A farmstead is a type of settlement where a single family or a small group of families live together in a single farm. The settlement is usually located in rural or agricultural areas, and the houses are built close to the land that is being farmed. The farmstead may also include a small shop, a church or a school. Compared to a village, town or metropolis, the size of a farmstead is much smaller, and the population is usually limited to a few families.

In which part of the atmosphere does rain clouds develop?

Awọn alaye Idahun

Rain clouds develop in the troposphere of the Earth's atmosphere. The troposphere is the lowest layer of the atmosphere and it extends from the Earth's surface up to an altitude of approximately 12 km. It is the layer where weather occurs, and it contains the majority of the Earth's clouds. The temperature in the troposphere decreases with height, which creates the conditions necessary for water vapor to condense and form clouds. Rain clouds develop when the condensed water droplets in clouds become large enough to fall to the ground as precipitation. So, the correct answer is Troposphere.

The concentration of industries in urban centres of developing countries is due to all the following except

Awọn alaye Idahun

The concentration of industries in urban centres of developing countries is due to several reasons, such as high demand, availability of labor, and presence of infrastructural facilities. However, one of the following options is not a reason for this concentration of industries, and this is "location of raw materials." Industries in developing countries often depend on imported raw materials, which are usually transported from the ports to the urban centres, where the industries are located. Therefore, the location of raw materials is not a significant factor in the concentration of industries in urban centres of developing countries.

Which of the following best describes the harmattan?It is

Awọn alaye Idahun

The harmattan is best described as "dry and dusty". It is a season in West Africa that occurs from November to March characterized by dry and dusty trade winds blowing from the Sahara Desert towards the Gulf of Guinea. The winds bring dry and dusty air, which can reduce visibility, cause respiratory problems and affect transportation and agriculture in the region. Therefore, is the correct answer.

The Longitude that joins Longitude 180_o at the opposite side of the globe to from a Great Circle is

Awọn alaye Idahun

Which of the following landforms is associated with wind deposition?

Awọn alaye Idahun

The nearest part of the ocean basin to the continent is called

Awọn alaye Idahun

The nearest part of the ocean basin to the continent is called the continental shelf. It is the shallow and relatively flat extension of a continent that lies between the shoreline and the continental slope. The continental shelf is part of the continental crust and can extend hundreds of kilometers from the coastline. It is an important area for economic activities such as fishing, oil and gas exploration, and shipping. The depth of the continental shelf can vary greatly, with some areas being only a few meters deep, while others can be as deep as 200 meters.

Which of the following is a fossil fuel?

Awọn alaye Idahun

Lignite is a fossil fuel. It is a type of coal that was formed from compressed and decayed plant material that accumulated in swamps and bogs millions of years ago. As such, it is considered a non-renewable resource because it takes millions of years to form. When lignite is burned, it releases energy in the form of heat and light, making it a valuable source of energy for electricity generation and heating.

A disaster caused by nature or man which poses a serious danger to lives and properties of the people is called environmental

Awọn alaye Idahun

The correct answer is hazard. An environmental hazard refers to any event or phenomenon that has the potential to cause harm to humans, animals, plants, or the environment. It can be caused by natural disasters like hurricanes, earthquakes, floods, or by human activities such as pollution, deforestation, or industrial accidents. These hazards can pose serious threats to the lives and properties of people and can cause significant damage to the environment. Therefore, it is important to identify and manage environmental hazards to minimize their impact and protect the well-being of people and the environment.

Which of the following factors can be used to differentiate between a village and a town?

Awọn alaye Idahun

One factor that can be used to differentiate between a village and a town is function. A village typically has a smaller population and is primarily agricultural, with most residents engaged in farming or other rural occupations. In contrast, a town is more urbanized, with a larger population engaged in a wider variety of occupations. The economic activities in a town are typically more diverse, and there is usually a greater concentration of commercial and administrative functions. Therefore, function is an important factor that can help distinguish between a village and a town.

Sills, dykes and batholiths are examples of

Awọn alaye Idahun

Sills, dykes, and batholiths are examples of intrusive volcanic landforms. Intrusive volcanic landforms are formed when magma solidifies beneath the Earth's surface. Sills are horizontal sheets of solidified magma that have intruded between layers of rock, while dykes are vertical or diagonal sheets of magma that have intruded through existing cracks in the rock. Batholiths are large masses of solidified magma that have pushed their way up into the Earth's crust, forming a dome-shaped structure. These intrusive volcanic landforms are typically made up of igneous rocks such as granite, gabbro, and diorite.

Which of the following lines of latitudes divides the earth into two bemispheres?

Awọn alaye Idahun

The line of latitude that divides the earth into two hemispheres is the Equator. The Equator is an imaginary circle that is equidistant from the North Pole and the South Pole, located at 0 degrees latitude. The earth is divided into the Northern Hemisphere and the Southern Hemisphere by the Equator, as well as into the Eastern Hemisphere and the Western Hemisphere. The Tropic of Cancer and the Tropic of Capricorn are lines of latitude located at 23.5 degrees north and south of the equator, respectively, while the Antarctic Circle is located at 66.5 degrees south of the equator.

The feature formed by cooling of molten magma across the bedding plane is

Awọn alaye Idahun

The feature formed by cooling of molten magma across the bedding plane is called a sill. A sill is a type of intrusive igneous rock that forms when magma is injected into a horizontal crack in the surrounding rock and then cools and solidifies. As the magma cools, it forms a flat sheet-like body that is parallel to the layering of the existing rock. Sills can be seen as flat, tabular bodies of rock that cut through existing rock layers. They can range in thickness from a few centimeters to several meters, and can cover large areas. Sills are typically composed of coarse-grained rocks, such as granite, gabbro or dolerite, and are often associated with other intrusive features like dykes, batholiths and laccoliths.

The part of the earth's crust that is covered by oceans and seas is called

Awọn alaye Idahun

The correct answer is hydrosphere. The hydrosphere is the part of the Earth's surface that is covered by water, including oceans, seas, rivers, lakes, and other bodies of water. It makes up about 71% of the Earth's surface and is essential to life on the planet. The hydrosphere is constantly moving and changing due to the water cycle, which involves evaporation, precipitation, and the flow of water from one place to another.

A plateau that is enclosed by two fold mountains is called

Awọn alaye Idahun

A plateau that is enclosed by two fold mountains is called an intermont plateau. This type of plateau is formed when two parallel mountain ranges are formed and the land between them is uplifted and flattened, creating a plateau. The word "intermont" means "between mountains," so an intermont plateau is essentially a plateau that is located between two mountain ranges. These plateaus can be found in many parts of the world and can have unique features and ecosystems.

The Alps, Himalayas and Rocky mountains are

Awọn alaye Idahun

The Alps, Himalayas, and Rocky Mountains are examples of fold mountains. Fold mountains are formed due to the collision of tectonic plates. When two plates collide, the pressure causes the edges to buckle and fold, creating mountains. The folding of the rock layers results in a series of ridges and valleys that form the mountain range. The Alps, Himalayas, and Rocky Mountains were formed due to the collision of the African and Eurasian plates, the Indian and Eurasian plates, and the North American and Pacific plates, respectively.

When wet and dry bulb thermometers record the same temperature, it means

Awọn alaye Idahun

When wet and dry bulb thermometers record the same temperature, it means that the air is saturated. Wet and dry bulb thermometers are used to measure relative humidity, which is the amount of moisture in the air compared to the maximum amount it can hold at a particular temperature. The wet bulb thermometer is wrapped in a wet wick, and the dry bulb thermometer is kept dry. As the water evaporates from the wet wick, it cools the wet bulb thermometer. The greater the difference in temperature between the wet and dry bulbs, the lower the relative humidity. When the air is fully saturated with water vapor, the evaporation of water from the wet bulb is minimized, and the temperatures of the two thermometers become the same. This means that the air cannot hold any more water vapor at that temperature, and the relative humidity is 100%.

Which of the following metals is used extensively in the electrical industry?

Awọn alaye Idahun

Copper is the metal used extensively in the electrical industry. This is because copper is an excellent conductor of electricity, which means that it allows electric current to flow through it easily. Copper wires are used in the production of electrical cables and wiring due to their high conductivity, flexibility, and strength. Copper is also resistant to corrosion, which makes it a durable material for use in electrical applications. Due to these properties, copper has become an essential metal in the electrical industry.

Which objective of the Economic Community of West African States (ECOWAS) IS performed by WAFU?

Awọn alaye Idahun

A port that that specializes in receiving and redistributing goods to other nations is

Awọn alaye Idahun

The correct answer is "an entreport". An entreport is a port that specializes in receiving and distributing goods to other nations. It is a hub for international trade, where goods are imported and then re-exported to other countries. Entreports are usually located in strategic locations, such as at the junction of major shipping routes, and have extensive facilities for warehousing, customs clearance, and transportation.

An advantage of air transport in the world is its

Awọn alaye Idahun

Air transport has the advantage of speedy movement of goods and passengers. This means that air transport is faster than other modes of transportation like road and sea transport. It can cover large distances in a short period of time, which makes it suitable for emergency situations or for transporting perishable goods that require speedy delivery. Additionally, air transport can also provide a direct connection between two destinations that are far apart, eliminating the need for transfers or multiple modes of transport. Overall, air transport is an efficient and effective mode of transportation for goods and passengers that require fast delivery.

Coal and mineral oil are usually found embedded in

Awọn alaye Idahun

Coal and mineral oil are usually found embedded in sedimentary rocks. Sedimentary rocks are formed from the accumulation of sediments such as sand, silt, and clay, which have been compacted and cemented over time. The organic matter of dead plants and animals gets trapped in the sediments during their deposition and gets buried under subsequent layers of sediment. The intense heat and pressure caused by the overlying layers of rock and sediment turn the organic matter into coal or oil. Therefore, coal and mineral oil are usually found in sedimentary rocks.

The export trade of most West African countries consists of

Awọn alaye Idahun

The export trade of most West African countries consists of primary products. Primary products refer to raw materials and commodities that are extracted or produced from natural resources, such as agricultural products, minerals, and petroleum. West African countries typically have economies that are heavily dependent on primary product exports, as they possess abundant natural resources. These countries may lack the infrastructure and technology required to process these primary products into finished goods, making it more economical to export them in their raw form. Therefore, primary products form the bulk of the export trade of most West African countries.

The process of head ward erosion will lead to the formation of

Awọn alaye Idahun

The nearest planet to the sun is the

Awọn alaye Idahun

The nearest planet to the sun is Mercury. It is the smallest planet in the solar system and the closest planet to the sun. It is named after the Roman messenger of the gods, Mercury, because it moves across the sky faster than any other planet. It takes only 88 Earth days to complete its orbit around the sun. Due to its proximity to the sun, the surface of Mercury can reach extremely high temperatures during the day and drop to very low temperatures at night.

An example of an organically formed sedimentary rock is

Awọn alaye Idahun

An example of an organically formed sedimentary rock is coal. Coal is formed from the remains of dead plants and animals that have been buried and subjected to high pressure and temperature over millions of years. As the organic material decays, it forms peat, which is then compressed into coal. Coal is a valuable energy resource and is used as fuel for power generation and other industrial processes.

Environmental balance includes all the following except

Awọn alaye Idahun

The concept of environmental balance refers to the idea that all living and non-living components of an ecosystem are interrelated and interdependent, and that a disturbance to one component can have cascading effects throughout the system. The hydrological cycle, carbon cycle, and food chain/food web are all examples of natural processes that contribute to environmental balance by regulating the flow of water, carbon, and energy through the ecosystem. However, the earthquake cycle is not typically considered as part of environmental balance because it is a geological process that is not directly related to the interactions between living and non-living components of an ecosystem. Earthquakes may have indirect effects on the environment, such as causing landslides or tsunamis that can impact ecosystems, but they are not a natural process that contributes to the balance of the ecosystem itself.

Swallow holes and disappearing streams are usually associated with

Awọn alaye Idahun

Swallow holes and disappearing streams are usually associated with limestone regions. This is because limestone is a soluble rock that can be easily eroded by weak acids, such as carbonic acid, which is found in rainwater. Over time, this erosion can create underground cavities and channels, which can cause the ground to collapse and form swallow holes. Disappearing streams can also occur in limestone regions when streams flow over porous limestone and then disappear underground through cracks and fissures.

Lines on maps joining places of same temperature above sea level are called

Awọn alaye Idahun

Lines on maps joining places of the same temperature above sea level are called isotherms. Isotherms are used to show areas of equal temperature on weather maps. The prefix "iso" means "equal," and "therm" refers to temperature. Isotherms are drawn as lines that connect points of equal temperature, and they help us visualize temperature patterns across regions. The closer the isotherms are to each other, the greater the temperature change over a short distance. So, isotherms are an important tool for meteorologists and climatologists to study and predict weather patterns.

The financial headquarters of the Econmic Community of West African State (ECOWAS) is located at

Awọn alaye Idahun

The major source of power for most terrestrial ecosystems is

Awọn alaye Idahun

The major source of power for most terrestrial ecosystems is solar energy. The sun is the ultimate source of energy for almost all life on Earth. Through the process of photosynthesis, plants convert solar energy into chemical energy, which is then passed on to herbivores, and then to carnivores, in a series of interconnected food chains. Solar energy also drives weather patterns and climate, which are important factors in determining the distribution and productivity of different ecosystems. While other sources of energy like geothermal, hydroelectric and nuclear power can be important for human societies, they are not significant sources of energy for natural ecosystems.

The measure of population concentration in place is called

Awọn alaye Idahun

The measure of population concentration in a place is called population density. It refers to the number of people living in a particular area, usually expressed as the number of individuals per square kilometer or square mile. It is an important factor in understanding the social, economic, and environmental conditions of a place. Population density can provide insights into issues such as urbanization, resource allocation, and sustainability.

Leather works, carving, cloth weaving are examples of

Awọn alaye Idahun

Leather works, carving, and cloth weaving are examples of local craft industry. This type of industry involves the production of goods using traditional methods and techniques that have been passed down through generations. Local craft industries often use locally sourced materials and have a strong cultural and artistic influence. These industries are typically small-scale and often involve individual or family-based production. The products produced by local craft industries are often unique and of high quality, and they can be important sources of income and cultural heritage for communities.

The problems associated with the world's high population growth rate include all the following except

Awọn alaye Idahun

The world's high population growth rate brings about several problems such as pressure on social amenities, inadequate food, and housing problems. Adequate medical facilities, on the other hand, are not considered a problem associated with high population growth rate. Thus, the answer is "adequate medical facilities."

(a) Draw a sketch map of Nigeria. On the map, show and name: 
(i) two areas important for cattle rearing; (ii) one town in any of the areas shown in (a) (i) above. 
(b) Explain four factors which encourage cattle rearing in Northern Nigeria. 
(c) Highlight three reasons why cattle rearing is less important in Southern Nigeria.

Awọn alaye Idahun

None

TEST OF PRACTICAL KNOWLEDGE QUESTION

Explain the occurrence of drought under the following headings:
(a) causes (b) area affected (c) effects (d) control

Awọn alaye Idahun

None

(a) Describe Nigeria under the following headings: (i) location; (ii) size. 
(b) In what five ways are highlands important to the economy of Nigeria

Awọn alaye Idahun

None

(a) Draw an outline map of Nigeria. On the map, show and name: (i ) the Western Highlands. (ii) Rivers Niger and Benue; 
(iii) the Kainji Lake; (iv) Lagos. 
(b) Highlight any three characteristics of rivers in Nigeria.
(c) State any two benefits of Kainji Lake to Nigeria. 

Awọn alaye Idahun

None

TEST OF PRACTICAL KNOWLEDGE QUESTION

(a) What is a latitude?

(b) State any three similarities between lines of longitudes and latitudes

(c) Outline any five ways in which lines of longitudes differ from lines of latitudes

Awọn alaye Idahun

None

TEST OF PRACTICAL KNOWLEDGE QUESTION

(a) Define climate

(b) With the aid of a diagram, describe how latitudes influence temperature

(c) Calculate the temperature at a coastal mountain peak of height 6000 metres when the temperature at sea level is 40ºC

Awọn alaye Idahun

None